Streamlight 69273 TLR-6 100-Lumen Tactical Weapon Light with Integrated Red Aiming Laser Designed Exclusively and Solely for M&P Shield and M&P Shield Plus, 9mm/.40 Only, Black

what our customer say this product:

Powered by

1. Clarks pilot car service Verified Buyer – 8 March 2024

   Works great.
   

2. Nick Verified Buyer – 1 July 2024

   Fit great on my shield plus. Had everything assembled in 5 minutes. Don’t need to man handle the mounting screws. The flashlight is pretty bright, and the laser is pretty cool. Adjusting the laser wasn’t hard at all either. Definitely recommend for bada** purposes.

   

3. hang Verified Buyer – 14 January 2025

   This thing is sick..although i may sell it. Heres why: The whole point of me getting a sw shield 9 was for its compact size and easy ability to carry. The gun is super light and thin which is perfect for wearing skinny jeans and tight ass t-shirts. So why add wieght and bulk to the gun? And not to mention the holster needed for the light are huge and bulky as well. It made drawing the gun a pain because the light would snag and created a larger profile of the gun under clothes. Lastly the gun is meant for edc and not tactical use. Im not kicking in doors, screaming “search warrant” with this gun. If i pull it out, i need it to be quick, smooth, and inconspicuous to the bad guy. So thats why i took it off.. on the other hand. It is great and is super cool. Doesnt add much wieght, but it is noticeable. The light doesnt protude from the barrel but does extend the trigger guard to the tip of the barrel. This creates almost a square profile under clothes. No more pocket carry. Laser is on point, flashlight could be brighter but is decent and the buttons are soft and easy to press on and off, not like the crimson trace buttons. Would be great if the light has lithium batteries than could be recharged.

   

4. Mark J Verified Buyer – 12 February 2025

   if you don’t have basic shooting skills this laser won’t make you a marksman. But if you have a handle on the basics you can definitely improve your accuracy from short distances in particular with point and shoot versus having to use your sights. I used this laser on an MP shield 3.1 barrel. Version 1.0 Cal Compliant. from about 5 yards and point and shoot only, I managed to shoot a tight group of about 2 inches, rapid fire. I shot better from a point and shoot versus using the sights. I did not make any laser adjustments though I did have to adjust the placement of the laser on the target as it seemed to shoot a couple of inches high. After adjustment I shot a very tight group. This is a far more economical solution versus trying to retrofit a red dot sight which probably would not be worth the money as this is really not a firearm for use much past 15 yards though I’m sure people may use it for that purpose. The shield in my opinion is for immediate short range self-defense and a laser sight adds to the effectiveness of this weapon. The laser site is easy to turn on with one’s right index finger and you can set which mode it defaults when you turn it on. I did not read the manual but if you are left-handed the default setting could be unreliable.

   

5. Matthew Verified Buyer – 13 March 2025

   I’m not one to write many reviews but I felt compelled to write one here. I picked up a S&W M&P Shield .40 cal a few weeks ago. I saw this TLR-6 combo on streamlightoutlet.com and thought what the heck…it’s not nearly as expensive as some other combos I’ve seen and it had good reviews, so I ordered it. It arrived the next day and took less than 5 minutes to install. Fit and finish are very high quality. I can’t imagine that it could be any better. The unit is advertised as being 100 lumens. I believe it is much brighter than that. Illumination with the light is a bright white (not yellow-ish at all) and is MORE than sufficient to illuminate anything you would want to see at a distance of (I would estimate) 40 to 50 yards away. The laser strength is good as well and I can easily spot it at distances over 100 yards away. I have absolutely NO REGRETS with buying this combo. Neither will you!

   

6. John Grey Verified Buyer – 4 April 2025

   The TLR-6 is the first modification I made to my M&P Shield 9 and my Springfield XD 9, and this one looks even better than it did on my XD. Installation: there are 3 hex screws that clamp the left and right housing to the light & laser cartridge assembly. Using the included hex wrench, remove the 3 screws, take off the outer shell/housing where you had accessed the screws, then rest the firearm into the remaining half of the housing. Press firmly until the firearm’s trigger guard is tightly seated into the housing, then take the other half of the housing and firmly press it into place and reinstall the 3 hex screws. Lastly, unsnap the latch on the bottom of the TLR-6 to access the battery compartment and install the 2 included 1/3N size batteries (they officially recommend only Duracell or Energizer brands). Operation: the TLR-6 has 3 settings: laser only, light only, then laser + light. These settings can be cycled by pressing both the left and right side buttons simultaneously. Pressing only one of these side buttons will toggle on/off the last chosen setting. The laser can be calibrated by using the included hex wrench on the screw openings on the bottom (horizontal/wind adjustment) and left (vertical/elevation adjustment) of the TLR-6. To zero/calibrate the laser sight, I went to an indoor shooting range and placed my target at about 10 yards. I then adjusted the laser to be roughly on point with the iron sight on that same target, then adjusted the elevation screw depending on high/low my bullet strikes actually landed. Worth noting that the distance you use to zero the laser will determine how high/low your bullets will strike. If you shoot at a distance less than your zero range, the bullet will strike high and vice versa for shooting at a distance greater than your zero range. Overall I’m very happy with the TLR-6. It’s nice and bright and complements the aesthetics of the handgun so well that it would look factory to a layman. If you plan to CCW, then I’d also recommend taking a look at the “M&P SHIELD 9/40 w/ TLR-6 Tuckable IWB KYDEX Holster” at Concealment Express. I use these together when carrying and it’s a snug fit. My only feedback is the same I gave for the XD variant on the TLR-6: it would be nice to engineer a tool-less installation design and/or one that doesn’t require a total disassembly of the shell housings from the laser/light cartridge to install.